一体机/触摸屏
   
  LCD触控一体机
 

大屏触控一体机
  双屏触控一体机
  表面声波屏
  红外线屏
  四线电阻屏
  五线电阻屏
  大屏/定制
  工业液晶
  多媒体软件
 
您现在的位置首页产品中心表面声波屏

触摸屏控制器  

 
Power Requirements +5VDC (max. 100mA, typical 70mA, 50mV)
Operating Temperature 0 to 70 degrees Centigrade
Storage Temperature -40 to 80 degrees Centigrade
Relative Humidity 95% at 60 degrees Centigrade
Protocol 1. RS232: 9600 bauds, None parity, 8 data bits
2. USB: USB 1.1 Low speed
3. PS/2: PS/2 mouse
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 0.5% tolerance
Report Rate 1. RS232: Max. 160 points/sec
2. USB: Max. 160 points/sec
3. PS2: Max. 140 points/sec
Response Time Max. 35 ms
Regulatory Approvals FCC-B, CE
Panel Resistance
4w 200 ~ 900 ohm (pin to pin on the same layer)
5w

50 ~ 900 ohm (pin to pin on the same layer)
8w 200 ~ 900 ohm (pin to pin on the same layer)

 
Power Requirements +5VDC (max. 100mA, typical 90mA, 50mV peak to)
Operating Temperature 0 to 70 degrees Centigrade
Storage Temperature -40 to 80 degrees Centigrade
Relative Humidity 95% at 60 degrees Centigrade
Interface 
Auto - detection :  
1. RS232: 9600 bauds, None parity, 8 data bits
2. USB: USB 2.0 compliant, full speed
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 1%
Report Rate Max. 250 points/sec
Response Time Max. 20 ms
Regulatory Approvals FCC-B, CE
Green Product RoHS
Pin Out Definition UL, UR, COM, LR, LL
ESD ± 16 KV Air, ± 8 KV Contact

 
Power Requirements 3.3V / 5VDC (max. 100mA, typical 70mA, 50mV)
Operating Temperature -10 to 85 degrees Centigrade
Storage Temperature -65 to 150 degrees Centigrade
Relative Humidity 95% at 60 degrees Centigrade
Protocol 1. RS232: 9600 bauds, None parity, 8 data bits, 1 stop bit
2. USB: USB 2.0 Full speed
 
Resolution 2048 x 2048
Accuracy Tolerance Max. +/- 0.5% tolerance
Report Rate 1. RS232: Max. 160 points/sec
2. USB: Max. 250 points/sec
 
Response Time Max. 20 ms
Regulatory Approvals FCC-B, CE
Panel Resistance
4w 200 ~ 900 ohm (pin to pin on the same layer)
5w

50 ~ 900 ohm (pin to pin on the same layer, touch resistance under 1.2k ohm )
  When both USB & RS232 cables connected to PC at the sam time, only USB will enable.